P. K. Engineers

Features:

• The Torch cooling process through water is called Water Cooled
• It is a continuous welding process, need not required changing electrode frequently

• 6 AWG through 4/0 AWG fully annealed

stranded bare copper per ASTM B-172

• Carolprene® 105°C, black

• Temperature Range: -50°C to +105°C

• CAROLPRENE (SIZE) AWG 105C WELDING

CABLE 600 VOLT P-07-KA1000015-MSHA

MADE IN USA

• Secondary voltage resistance welding leads

in heavy duty or mining applications

• Power supply applications not exceeding

600 volts AC

• Sizes 1/0 and larger for permanent wiring

in conduit or tray of 600 V power supplies,

hoists, cranes or other applications where

flexible power leads must be installed in

conduit, raceways or trays

• Water-resistant

• Sunlight-resistant

• Designed to withstand severe environmental

conditions

• Withstands exposure to oil, acids, alkalies,

heat, flame, moisture, and chemicals

• Meets or exceeds flame test requirements

of MSHA

• TRU-Mark® marking system and indent

printed MSHA number

• MSHA Approved

• RoHS Compliant

Suggested Ampacities

For 600 Volt In-Line Applications

Ampacities for portable cable in accordance with NEC Table

400.5(A)(2).

May not be suitable for all installations per National Electrical

Code®.

Features:

• Flash Back Arrestor is a device to eliminate every possibility of explosion or fire caused by flashback.
• Available for Oxygen, Acetylene & LPG(Regulator & Cutter), etc.
• Flash Back Arrestor is suitable for fitting on the regulator outlet.
• Oxygen for use at a maximum inlet pressure 10 bar(150psi).
• Acetylene or LPG /Propane for use at a maximum inlet pressure of 1.5 bar(22psi)with Acetylene or LPG /Propane inlet pressure of 3bar(43psi).
• Conform to IS 11006

• Made from fresh and virgin raw material with no use of fillers.
• High flexibility in low temperature and rugged dimensional stability in high temperature.
• Flame Retardant properties.
• Hydrocarbon Gases (LPG , Acetylene etc) resistant.

Page Sizes Available:

Cutting Blowpipes(Torch)

• Its a Heavy Duty Cutting Blowpipe
• Gas Mixing: Nozzle Mixing Type
• Working Pressure - 2.5 kgf/cm² to 5.0 kgf/cm²
• Resistance to Backfire
• Economy of Gas saving
• ISI approved IS 7653:1975

Gouging Torches

GT- 6(600Amps.), 9(900Amps.), 12(1200Amps.) & 20(2000Amps.)

Features:

• Gouging Torches are used to Gouge, Crompter, Grove, Cut  Bevel, Flash of various metals like Aluminum, Copper, Brass, Steel & Cast Iron.       
• For high conductivity of current, special grade copper/copper alloy used.
• Heat resistant insulators
• 360°free revolving movement between torch and mono cable.
• Standard Length of Cable is 2 mt. long(additional length available on demand)
• Weight of Torch 2.6 kg.(approx)

• Type-A is fully insulated, suitable adverse welding conditions
• Rated Current: 200, 400 and 600 Amps.
• Conform to IS 2641

• Type-B is semi insulated for general open shop conditions
• Rated Current: 200, 400 and 600 Amps.
• Conform to IS 2641

Features:

• The Torch cooling process through gas called Gas Cooled
• The Shielding gas is inert, the welding process is known as
• MIG process
• The gas has a definite chemical process activity at the high temperature of the electric arc is known as MAG process.
• The Torch use as continuous welding process, need not
• Required Changing electrode frequently
• Conform to IS7931